Photoresist
Photoresist is a light-sensitive material used in photolithography processes, particularly in the fabrication of semiconductor devices, integrated circuits, and microelectromechanical systems (MEMS). It is a crucial component in the patterning of semiconductor wafers during the manufacturing process.
The primary function of photoresist is to undergo a chemical or physical change when exposed to light, making it selectively soluble or insoluble in a subsequent development step. The general process involving photoresist includes the following steps:
Coating: A thin layer of photoresist is applied to the surface of a substrate, often a silicon wafer. The substrate is typically cleaned before coating.
Exposure: The photoresist-coated substrate is exposed to UV light through a photomask or reticle. The photomask contains the pattern that needs to be transferred to the substrate. The exposed areas of the photoresist undergo a chemical change.
Development: The substrate is immersed in a developer solution. In positive photoresist, the exposed areas become soluble and are removed during development, leaving the unexposed areas. In negative photoresist, the exposed areas remain, and the unexposed areas are dissolved.
Pattern Transfer: The remaining patterned photoresist serves as a mask for subsequent processes such as etching or deposition. The pattern is transferred to the underlying layers of the substrate.
There are two main types of photoresist: positive and negative.
Positive photoresist: In positive photoresist, exposure to light increases solubility. The exposed areas are removed during development, leaving the unexposed areas as the desired pattern.
Negative photoresist: In negative photoresist, exposure to light decreases solubility. The unexposed areas are removed during development, leaving the exposed areas as the pattern.
The choice between positive and negative photoresist depends on the specific requirements of the fabrication process.
Photoresists play a critical role in the semiconductor manufacturing industry, enabling the creation of intricate patterns with high precision on the nanoscale, which is essential for the production of modern electronic devices.
To learn more about photoresist, please click the article below for further reading.


Low-Edge-Bead Ultrasonic Photoresist Coating for LCD and OLED Glass
Rectangular LCD and OLED glass can develop coating ridges near edges and corners. Ultrasonic spraying avoids high-speed centrifugal flow but does not eliminate perimeter accumulation by itself.
Integrated Robotic Handling in an Ultrasonic Photoresist Coating System: An Engineering Guide
Integrated Robotic Handling in an Ultrasonic Photoresist Coating System: An [...]
Large Glass Photoresist Ultrasonic Spray Coating: Process Development Guide
A reliable large-panel spray process begins with complete material characterization and measurable acceptance criteria. Nozzle architecture, scan trajectories, airflow, temperature, and bake must be optimized as a coupled system.
UAM6100WS Automated Photoresist Coating with Wafer Handling: Building a Stable Process
UAM6100WS Automated Photoresist Coating with Wafer Handling: Building a Stable [...]
Can Ultrasonic Photoresist Coating Replace Spin or Slot-Die Coating?
Ultrasonic spray, spin coating, and slot-die coating should be compared on matched substrate geometry, resist chemistry, defect specifications, and production volume. No one technique is universally best.
Ultrasonic Photoresist Coating on Glass Carriers for Advanced Packaging
Glass carrier substrates used in advanced packaging research may need sacrificial photoresist, permanent photosensitive dielectric, or temporary bonding adhesive. These three material classes have distinct rheology and downstream qualification requirements.
Ultrasonic Photoresist Coating for Glass Microfluidics and MEMS Microstructures
Microfluidic and MEMS research can require resist deposition over recesses, steps, patterned glass, and hybrid materials. Ultrasonic spraying allows programmable passes, but the deposition geometry determines whether walls and trench floors receive adequate coverage.
Ultrasonic Photoresist Spraying for LCD and OLED Glass Panel Research
Display research requires flexible coating on rectangular glass for array processes, color-filter experiments, and black-matrix materials. Production slot-die coating remains a strong benchmark, whereas ultrasonic spraying can be valuable for low-volume materials screening and selective deposition.
Ultrasonic Photoresist Coating for Photomask and Reticle Glass Substrates
Mask glass requires exceptionally tight control of pinholes, chromium-layer adhesion, contamination, and critical-dimension fidelity. A 500 × 500 mm panel also challenges raster overscan, perimeter uniformity, and clean loading.
Ultrasonic Photoresist Spray Coating Equipment for 510 × 515 mm Glass Substrates
Engineering ultrasonic photoresist coating equipment for 510 × 515 mm rectangular glass substrates: nozzle selection, film uniformity, contamination and qualification.
Photoresist Step Coverage on 10–25 µm MEMS Structures and the Transition to Large Substrates
Photoresist Step Coverage on 10–25 µm MEMS Structures and the [...]
Photoresist Coverage in V-Grooves, Vertical Trenches and TSVs: An Ultrasonic Spray Evaluation Guide
Photoresist Coverage in V-Grooves, Vertical Trenches and TSVs: An Ultrasonic [...]

