PTFE Coatings for Medical Puncture and Biopsy Needles
1. Application Background
Puncture needles and biopsy needles are widely used in clinical diagnosis, tissue sampling, fluid aspiration, and interventional treatment. Common products include tissue biopsy needles, bone marrow puncture needles, specialized interventional puncture needles, and certain cannula needles.
These devices typically pass through skin, soft tissue, or other biological tissues, so needle-tip geometry, surface roughness, material rigidity, and coating performance all affect the puncture process.
For certain specialized puncture and biopsy needles, PTFE coating can be considered as an option for reducing surface friction and improving tissue-contact characteristics.
It should be noted that many common low-friction clinical needles also use siliconization; PTFE is not the standard coating for every puncture needle.
2. Core Functions of PTFE Coatings
Reducing puncture friction
PTFE’s low-friction properties can help reduce sliding resistance between the needle shaft and tissue. However, actual puncture force is also significantly affected by tip sharpness, insertion angle, and tissue properties.
Reducing tissue adhesion
In some applications, low-surface-energy coatings may reduce tissue or biological material adhesion, facilitating needle withdrawal and cleaning.
Improving surface consistency
For metal needles that have undergone machining, grinding, or surface treatment, an appropriate coating can form a relatively continuous surface layer.
Meeting functional requirements in specified regions
Some needles require coating only on the shaft, while the tip, sampling groove, or other functional regions must remain unchanged.
3. Typical Structure and Technical Parameters
| Parameter | Typical Design |
|---|---|
| Substrate | 304, 316L stainless steel |
| Needle gauge | Approximately 14G–25G, depending on product type |
| Surface treatment | Polishing, passivation, siliconization, or functional polymer coating |
| PTFE coating thickness | Micrometer-scale thin film is generally a development target; validation required |
| Key performance | Puncture force, withdrawal force, adhesion, particle shedding |
| Coated region | Needle shaft, outer cannula surface, or specified local region |
For puncture needles, a thicker coating is not necessarily better. Excessive thickness may change tip geometry, increase outer diameter, or even interfere with the sampling channel.
4. Mainstream Preparation Processes
Low-friction surface treatments for needle products typically include dip coating, conventional spraying, and siliconization.
Dip coating is suitable for full-surface coating but may cause pooling at the tip and local coating nonuniformity. Conventional air spraying can be used for certain metal needles, but fixtures, masking, and spray parameters are needed to control critical regions.
For PTFE dispersions, coating adhesion, drying, and heat-treatment conditions require particular attention. High-temperature sintered PTFE processes may alter the properties of some precision needle assemblies and are therefore not suitable for every product.
5. Potential of Ultrasonic PTFE Spray Coating
Ultrasonic spraying uses precision liquid delivery, low-velocity atomization, and controlled movement to achieve selective thin-film deposition on needle surfaces.
For example, moving the nozzle axially while rotating the needle shaft can be investigated to obtain uniform coverage of cylindrical surfaces. Where the tip or sampling groove must remain uncoated, local masking and zoned spraying can be combined.
Potential advantages include reducing local pooling risks, improving control of applied coating quantity, reducing overspray in certain conditions, and enhancing automated processing.
However, these benefits must be verified through comparative sample testing, particularly to confirm that the PTFE coating does not increase puncture force, damage the tip, or detach during use.
6. Quality Control and Development Trends
PTFE coatings for puncture needles should be evaluated primarily for puncture and withdrawal forces, tip integrity, adhesion, wear resistance, particle shedding, sterilization stability, and biocompatibility.
For biopsy needles, it is also necessary to verify whether the coating affects the amount of tissue sampled, specimen integrity, or histopathological analysis.
Conclusion: In selected puncture devices, PTFE coatings offer another option for low-friction surface design. The value of ultrasonic spraying lies mainly in precise, localized, and controlled deposition, but it must match the needle structure and clinical-use requirements.
Explore Ultrasonic PTFE Coating with Cheersonic
Medical device manufacturers and R&D teams exploring functional PTFE coatings are invited to contact Cheersonic to discuss their coating projects and arrange coating sample feasibility testing. Learn more about our ultrasonic coating equipment solutions.





