PTFE Coatings for Endoscopic Instruments and Accessories

1. Application Background

Endoscopy is widely used in gastrointestinal, respiratory, urological and other minimally invasive diagnosis and treatment. Through an endoscope working channel, doctors use biopsy forceps, snares, sampling brushes, guidewires and other accessories for examinations or treatment.

These accessories usually pass through long, curved working channels with limited inner diameter. Friction between an instrument and the channel wall may affect advancement, withdrawal and maneuverability.

Low-friction surface treatment is therefore important for some endoscopic accessories. PTFE can be used as a coating, liner, sheath or other structural material.

2. Core Functions of PTFE Coatings

Reducing sliding friction in working channels

For some metal operating wires, drive wires and movable components, PTFE coatings help reduce relative sliding resistance.

Improving precision transmission

Biopsy forceps and snares generally transmit movement through long, slender operating wires. Reducing unnecessary friction can improve mechanical response.

Reducing adhesion on specific surfaces

PTFE’s low surface energy can be used on selected anti-adhesion surfaces, but cannot guarantee complete prevention of biological adhesion.

Supporting precision structural design

Thin films provide surface functions on small-diameter operating wires within limited space, but final outside diameter must be strictly controlled.

3. Typical Structure and Technical Parameters

Endoscopic accessories vary by application. Biopsy forceps generally contain distal jaws, a drive mechanism, operating wire, flexible outer sheath and proximal handle.

A snare may contain a metal wire loop, operating wire, outer sheath and handle.

ParameterTypical design
SubstrateStainless steel, nitinol and medical polymers
Coated regionsOperating wires, drive wires and selected metal accessory surfaces
Coating formPTFE film or another low-friction treatment
Dimensional requirementsDetermined by working channel and accessory outer diameter
Key performanceFriction, bending durability, adhesion and particle shedding

Coatings on repeatedly bent accessories must withstand strains from flexing and movement.

Excessively thick or rigid coatings may crack or peel and even impair passage through the endoscope channel.

4. Mainstream Preparation Processes

Dip coating

Suitable for complete coating of certain long metal wires or simple structures, but film thickness, runoff and end pooling must be controlled.

Conventional spraying

Applicable to local outer surfaces, although small components may need precision fixtures and masking.

PTFE liner and sheath processes

PTFE liner tubes and other low-friction polymer structures are common solutions for flexible outer sheaths requiring low-friction lumens.

These processes serve different purposes; a liner structure must not be equated with an external surface coating.

5. Potential of Ultrasonic PTFE Spray Coating

Ultrasonic spraying can be investigated for external coating of slender metal wires, operating rods and other accessible endoscopic accessory components.

Controlling nozzle position, liquid feed rate and workpiece motion allows thin-film deposition in specified regions.

For long operating wires, continuous-feed spraying systems can be evaluated to integrate wire movement, spraying and drying into an automated manufacturing process.

Continuous long-wire coating requires particular attention to whether the coating is sufficiently dry and mechanically stable before it reaches guide rollers, clamps or winding mechanisms.

External ultrasonic spraying may not be suitable for complex lumens or assembled accessories.

6. Quality Control and Development Trends

Quality validation should focus on:

  • Friction and coating integrity under bending.
  • Wear resistance after repeated advancement and withdrawal.
  • Adhesion and particle shedding.
  • Fit between accessory outer diameter and working channel.
  • Changes after cleaning, disinfection and sterilization.

Endoscopic accessories will continue toward miniaturization, precision and multifunctionality, requiring greater dimensional control and surface-treatment reliability.

Conclusion: PTFE coatings offer low-friction surface designs for selected endoscopic accessories. Ultrasonic spraying is worth investigating for slender operating wires and precision metal components, especially localized coating or automated thin-film deposition.

Explore Ultrasonic PTFE Coating with Cheersonic

Medical device manufacturers and R&D teams are invited to contact Cheersonic to discuss functional coating projects and arrange coating sample tests. See our ultrasonic coating equipment solutions.