coating equipment solutions - ultrasonic atomization

14 11, 2022

Deposition of Thin Photoresist Films

Deposition of Thin Photoresist Films Ultrasonic Coating Deposition of Thin Photoresist Films - Cheersonic The new UAM6000 system is a full coating solution, configured with ultrasonic spray shaping nozzles, depending upon coating requirements. These nozzles feature up to 90% reduction in material consumption, non-clogging performance, precise control of droplet size, and repeatable spray patterns at ultra-low flow rates. UAM6000 unique system features include: · Automated spray coating with [...]

13 11, 2022

Hydrogen PEM Electrolyser And Fuel Cell Coating Machine

Hydrogen PEM Electrolyser And Fuel Cell Coating Machine Hydrogen PEM Electrolyser And Fuel Cell Coating Machine - Cheersonic The most important factor for the coatings is a uniform, defect-free and fractureless layer. Any imperfections or cracks within the layer can have immediate, detrimental effects on the bipolar plate performance - especially in a highly corrosive environment such as PEM electrolysers. Bipolar plates have grooves on the surface, which [...]

13 11, 2022

Ultrasonic Coating System for Photoresist Deposition

Ultrasonic Coating System for Photoresist Deposition Ultrasonic Coating System for Photoresist Deposition Offers Unique Advantages Cheersonic ultrasonic atomization equipment has been used to apply photoresist film coatings on semiconductor wafers. As high-aspect-ratio MEMS and sensor manufacturing continues to expand, Cheersonic has developed a suite of photoresist thin film coatings that overcome the challenges of uniformly covering photoresist onto wafers with deep trenches or difficult topography. The UAM6000 was [...]

12 11, 2022

Hydrogen Fuel Cells Spray Coating Equipment

Hydrogen Fuel Cells Spray Coating Equipment Hydrogen Fuel Cells Spray Coating Equipment - Cheersonic Case: 1. Application: PEM fuel cell 2. Size of membrane: 400*400mm We have much experience in fuel cell fields and there are five experienced engineers who has done a number of trials. For the benchtop ultrasonic coater UAM4000L series, it is popular in laboratory R&D and low volume production. The specific configuration is as [...]

12 11, 2022

Development of Mask

Development of Mask Development of Mask - Ultrasonic Coating System for Photoresist Deposition Offers Unique Advantages Photolithography technology is a core step in semiconductor device manufacturing process, and lithography machine is also known as mask alignment exposure machine. This is because the commonly used lithography machine is mask alignment lithography. The optical lithography technology has roughly gone through three stages so far, and the mask plays an important [...]

11 11, 2022

How to Evaluate Carbon Capture?

How to Evaluate Carbon Capture? How to Evaluate Carbon Capture? Electrolyzer Coating Systems - Cheersonic Carbon capture and storage, (carbon capture and storage, CCS), refers to the technology of collecting and burying carbon dioxide to avoid entering the atmosphere and causing the greenhouse effect. This category of technology is designed to capture carbon dioxide to slow global warming—from power plants, industrial sites, or even directly from the air, [...]

11 11, 2022

Fully Automate Reciprocating Ultrasonic Spray Fluxing System

Fully Automate Reciprocating Ultrasonic Spray Fluxing System UAM8000 is a fully automate reciprocating ultrasonic spray fluxing system that is designed for spraying water soluble/organic acid fluxes. All of the materials are constructed with materials that are proven compatible with these very corrosive fluxes. This versatile system is easily integrated with all major wave solder machines. The flexibility of selective area fluxing or full board width coverage combined with [...]

10 11, 2022

Current Carbon Capture Technology

Current Carbon Capture Technology Current Carbon Capture Technology - Electrolyzer Coating Systems - Cheersonic Carbon capture technology has already taken shape. For waste gas with a carbon dioxide concentration of about 10%, the cost of enriching carbon dioxide is currently about 200 yuan/ton. The current mature method is to use amine washing method. Other methods such as adsorption method, membrane separation method, cooling separation method can only be [...]

10 11, 2022

Roll-to-roll Ultrasonic Fuel Cell Catalyst Coating Systems

Roll-to-roll Ultrasonic Fuel Cell Catalyst Coating Systems Roll-to-roll Ultrasonic Fuel Cell Catalyst Coating Systems - Cheersonic For fuel cell fabrication, ultrasonic coating equipment is very commonly used to preparecatalyst inks. Besides ink fabrication, ultrasonic coating equipment is used to assist catalyst synthesis, catalyst support treatment MEA fabrication and humidifier among others. Among these ap-plications, ultrasonically spray coated MEAs have shownremarkable platinum mass power density. In gen-eral, MEAs can [...]

10 11, 2022

Spray Coating Photoresist On Silicon Wafers

Spray Coating Photoresist On Silicon Wafers Spray Coating Photoresist On Silicon Wafers - Ultrasonic Photoresist Coater - Cheersonic Spin coating of photoresist, although an established technique for resist depositionis often not suitable for applications with high topography on the silicon or glasssurface. Since 3D structures such as trenches, V-grooves and holes are basic elementsin building the required functionality of MEMS devices, spin coating usually causesdefects on the resist [...]