4 12, 2022

GDL Catalyst Coating

GDL Catalyst Coating GDL Catalyst Coating - Spray Coating Application - Cheersonic The Gas Diffusion Layer (GDL) is a very important supporting material in a Membrane Electrode Assembly (MEA). Gas diffusion layers are a porous material composed of a dense array of carbon fibers, which also provides an electrically conductive pathway for current collection. GDL plays an important role of electronic connection between the bipolar plate with channel-land [...]

3 12, 2022

AEMs Coating

AEMs Coating AEMs Coating - Automated Spray Coating Systems - Cheersonic Fuel cells are a promising clean energy technology because they are not limited by heat-engine thermodynamics and can operate at low temperature without combustion byproducts. The byproduct of hydrogen/oxygen fuel cells is water. With the supply of fuels, fuel cells can run for infinite time and produce energy. Fuel cells can be used in many fields including [...]

2 12, 2022

Carbon Monoxide Sensor Membrane Electrode

Carbon Monoxide Sensor Membrane Electrode Carbon Monoxide Sensor Membrane Electrode - Fuel Cell Coating - Cheersonic For ordinary people, coal gas is used as civil gas. Compared with direct coal combustion, civil gas can not only significantly improve the efficiency of coal consumption and reduce environmental pollution, but also greatly facilitate people's lives, and has good social and environmental benefits. Carbon monoxide sensor membrane electrode, double-sided diffusion layer, [...]

2 12, 2022

Anion Exchange Membrane Coatings for Alkaline Fuel Cells

Anion Exchange Membrane Coatings for Alkaline Fuel Cells Anion Exchange Membrane Coatings for Alkaline Fuel Cells - Cheersonic Any fuel cell is divided into three main components. The electrodes, electrolyte and the external circuit make up a single fuel cell. The aqueous electrolyte used in the AFC is sensitive to the presence of CO2 in the feed stream of air, which is fed across the cathode. The reaction [...]

1 12, 2022

Liquid Cooled Battery VS Air Cooled Battery

Liquid Cooled Battery VS Air Cooled Battery For new energy vehicles, the heat management system will play a vital role. After all, the battery, which is a little "squeamish", will inevitably lose its temper with the car owner because the temperature is too high or too low. As far as the thermal management systems of most new energy vehicles on the market are concerned, they are mainly divided [...]

1 12, 2022

Alkaline Fuel Cells Coating Coating Systems

Alkaline Fuel Cells Coating Coating Systems Alkaline Fuel Cells Coating Coating Systems - Catalyst Coating - Cheersonic All fuel cells are based on the principle that fuel reacts at the anode, and air or oxidant at the cathode of an electrochemical system that produces electric power and some excess heat. In this regard, alkaline-based fuel cells are no different from acidic proton exchange membrane fuel cells (PEMFCs). Historically [...]

30 11, 2022

R&D Tabletop Coating System

R&D Tabletop Coating System The UAM4000L R&D Tabletop Coating System is a fully enclosed programmable XYZ motion system for depositing uniform thin-film coatings for electronics and solar applications including photoresist deposition and various thin-film solar cell coatings. UAM4000L is a coating solution for R&D and low-volume production applications such as coating photoresist onto wafers and MEMs, or applying buffer layers for thin-film solar cells (Cds), active layers such [...]

30 11, 2022

Uniform Coatings of Biomass-Based Fuel-Fed Fuel Cells

Uniform Coatings of Biomass-Based Fuel-Fed Fuel Cells Uniform Coatings of Biomass-Based Fuel-Fed Fuel Cells - Cheersonic The increasing concerns for sustainable economy and alarming environmental health are making researchers to pay serious attention to bio-fuels that too primarily synthesized from the biomass. An energy transforming machine extracting energy directly from biomass would be an idyllic condition. Regrettably, devices using sustainable energy resource have shown to have low output, [...]

29 11, 2022

Roll-to-roll Ultrasonic Fuel Cell Coating Equipment

Roll-to-roll Ultrasonic Fuel Cell Coating Equipment The roll-to-roll ultrasonic fuel cell coating equipment is very suitable for fabricate high performance low and ultra-low Pt loading MEAs, and it had been demonstrated in low temperature PEMFC. Cheersonic focused on the ultrasonic coating technology more than 20 years. The ultrasonic spray coating equipment from Cheersonic can deposit uniform catalyst coatings onto PEM, GDLs, electrodes, various electrolyte membranes and solid oxide [...]

29 11, 2022

Gas Diffusion Layer Catalyst Coating

Gas Diffusion Layer Catalyst Coating Gas Diffusion Layer Catalyst Coating - Spray Coating Systems - Cheersonic In PEFCs, the electrode structure is composed of a catalytic layer supported by porous gas-diffusion layers (GDLs) where multiphase reactant/product transport and electron conduction occur. Product liquid water can contribute to performance and degradation issues if not properly handled. Understanding dynamic liquid-water uptake and removal in gas-diffusion layers (GDLs) is essential to [...]

Go to Top