Membrane Electrode CCM Coating Process Today we will have an in-depth understanding of the membrane electrode CCM production process and coating equipment. In the membrane electrode CCM production process, it is first necessary to use polymer materials, such as polyimide, polytetrafluoroethylene, etc., as the base material. Then, a layer of catalyst active material is coated on these substrates to promote the electrode reaction. Next, the catalyst active material [...]

Preparation Method of Perovskite Layer Thin Film The preparation of perovskite layer thin films is a critical step if you want to improve the photoelectric conversion rate of solar cells! In the production process of perovskite solar cells, ITO thin film deposition is a key step that can improve the photoelectric conversion rate of perovskite solar cells. Vacuum evaporation technology is a core technology in the deposition process, [...]

Large Area Membrane Electrode Catalyst Coating Today I would like to introduce to you a high-end coating system, UAM6000XL! It can be used to produce large-scale membrane electrode coatings. The UAM6000XL coating system has the ability to coat catalysts on GDL or fuel cell membranes, with a coating area of up to 1.2 meters * 1.2 meters or more, which provides great convenience and convenience for the production [...]

Coating Method for Large-area Perovskite Battery Thin Films As a coating method for large-area perovskite cell films, ultrasonic spraying machine is a good choice. Ultrasonic spraying is a coating method for preparing large-area perovskite cell films, which has the characteristics of high stability and wide application. The advantage of this method is that it can promote hole transport and adjust the quality of the perovskite film, while being [...]

Ultrasonic Spraying of Fuel Cell Membrane Electrodes Ultrasonic spraying technology is used to prepare fuel cell membrane electrodes with high efficiency and good coating quality. Do you know how it is done? The membrane electrode of the fuel cell is a key core component of the fuel cell power generation. The membrane electrode and the bipolar plates on both sides form the basic unit of the fuel cell [...]

Preparation of Perovskite Battery Thin Films by Ultrasonic Spraying Ultrasonic spraying is a new method for preparing large-area perovskite battery films. The ultrasonic spraying method has the advantage of high stability. It is made of high-performance titanium alloy and stainless steel. It has strong adaptability, corrosion resistance, no pressure, no noise, no nozzle wear and clogging, and high uniformity of atomized particles. Perovskite batteries are currently the most [...]

Preparation of Fuel Cell Membrane Electrodes by Ultrasonic Spray Ultrasonic spraying is used to prepare fuel cell membrane electrodes. This technology must be unfamiliar to everyone. Today I will introduce it to you. The preparation of fuel cell membrane electrodes by ultrasonic spraying is a new fuel cell technology developed in recent years. The principle of this technology is to apply ultrasonic coating technology on the membrane electrode [...]

Spraying Water-based Organic Catalysis Spraying Water-based Organic Catalysis With Ultrasonic Spray System - Cheersonic UAM6000S Ultrasonic coating system can solve the following tasks: Installation for spraying an aqueous-organic suspension of a catalyst onto a flat horizontal surface (on a membrane or on a gas pump). Ultrasound can ensure that the suspension is as uniform as possible. The application area is at least 25 cm2, but up to 50 [...]

Four Components of PEM Fuel Cells -The anode, also known as the negative electrode of a fuel cell, has multiple functions. It conducts electrons released from hydrogen molecules so that they can be used in external circuits. It has etched channels that can evenly disperse hydrogen gas on the surface of the catalyst. -The cathode (the positive electrode of a fuel cell) is engraved with a channel that [...]

Ultrasonic Spray Proton Exchange Membrane Ultrasonic Spray Proton Exchange Membrane. Ultrasonic spraying is now widely used in catalyst synthesis, catalyst carrier treatment, catalyst layer manufacturing, membrane electrode assembly (MEA) manufacturing, etc. for fuel cell applications. Of the uses mentioned above, ultrasonic spray technology is primarily used in MEA fabrication, particularly because of its proven ability to produce ultra-low platinum loadings. About Cheersonic Cheersonic is the leading developer and manufacturer [...]