7 11, 2023

Process for Preparing Fuel Cell Membrane Electrode Films

By |2023-10-30T08:15:10+00:00November 7th, 2023|Energy, NEWS|Comments Off on Process for Preparing Fuel Cell Membrane Electrode Films

Process for Preparing Fuel Cell Membrane Electrode Films The membrane electrode film preparation process of fuel cells is an important technology, which determines the performance and life of fuel cells. Fuel cell vehicles have an electrochemical power generation system that uses hydrogen as fuel to convert chemical energy into electrical energy, heat energy and water. In order for the electrochemical conversion process to work quickly to meet all [...]

4 11, 2023

Ultrasonic Spraying Fuel Cell Carbon Paper

By |2023-10-30T07:39:22+00:00November 4th, 2023|Energy, NEWS|Comments Off on Ultrasonic Spraying Fuel Cell Carbon Paper

Ultrasonic Spraying Fuel Cell Carbon Paper Ultrasonic Spraying Fuel Cell Carbon Paper - Cheersonic The rapid development of fuel cells has placed increasing demands on gas diffusion layer materials, and carbon paper is a gas diffusion layer material that has attracted much attention. Carbon paper has broad application prospects in the field of fuel cells. As an excellent gas diffusion layer material, it has good electrical conductivity, corrosion [...]

1 11, 2023

Ultrasonic Spray Coating Photovoltaic Glass

By |2023-10-30T07:18:54+00:00November 1st, 2023|Energy, NEWS|Comments Off on Ultrasonic Spray Coating Photovoltaic Glass

Ultrasonic Spray Coating Photovoltaic Glass Ultrasonic spray coating of photovoltaic glass to prepare photovoltaic glass films with protective functions Photovoltaic glass is a very important photovoltaic material, and ultrasonic spraying technology is a very common method for preparing photovoltaic glass films. Ultrasonic spraying technology is a very advanced spraying technology that uses ultrasonic vibration to evenly spray paint on the glass surface. Compared with traditional spraying technology, ultrasonic [...]

30 10, 2023

Hydrogen Fuel Cell Membrane Electrode Coating Process

By |2023-10-30T06:57:53+00:00October 30th, 2023|Energy, NEWS|Comments Off on Hydrogen Fuel Cell Membrane Electrode Coating Process

Hydrogen Fuel Cell Membrane Electrode Coating Process In the production of hydrogen fuel cell membrane electrodes, the coating process is a crucial step. The coating process is a technology that evenly coats the catalyst on the electrode with nanoscale precision. This process requires precise control of coating thickness, uniformity and coating speed to ensure electrode performance and stability. During the coating process, some special equipment is required, such [...]

27 10, 2023

Membrane Electrode CCM Coating Process

By |2023-10-27T06:55:36+00:00October 27th, 2023|Energy, NEWS|Comments Off on Membrane Electrode CCM Coating Process

Membrane Electrode CCM Coating Process Today we will have an in-depth understanding of the membrane electrode CCM production process and coating equipment. In the membrane electrode CCM production process, it is first necessary to use polymer materials, such as polyimide, polytetrafluoroethylene, etc., as the base material. Then, a layer of catalyst active material is coated on these substrates to promote the electrode reaction. Next, the catalyst active material [...]

26 10, 2023

Preparation Method of Perovskite Layer Thin Film

By |2023-10-27T07:49:54+00:00October 26th, 2023|Energy, NEWS|Comments Off on Preparation Method of Perovskite Layer Thin Film

Preparation Method of Perovskite Layer Thin Film The preparation of perovskite layer thin films is a critical step if you want to improve the photoelectric conversion rate of solar cells! In the production process of perovskite solar cells, ITO thin film deposition is a key step that can improve the photoelectric conversion rate of perovskite solar cells. Vacuum evaporation technology is a core technology in the deposition process, [...]

24 10, 2023

Large Area Membrane Electrode Catalyst Coating

By |2023-10-27T06:48:39+00:00October 24th, 2023|Energy, NEWS|Comments Off on Large Area Membrane Electrode Catalyst Coating

Large Area Membrane Electrode Catalyst Coating Today I would like to introduce to you a high-end coating system, UAM6000XL! It can be used to produce large-scale membrane electrode coatings. The UAM6000XL coating system has the ability to coat catalysts on GDL or fuel cell membranes, with a coating area of up to 1.2 meters * 1.2 meters or more, which provides great convenience and convenience for the production [...]

23 10, 2023

Coating Method for Large-area Perovskite Battery Thin Films

By |2023-10-27T07:44:53+00:00October 23rd, 2023|Energy, NEWS|Comments Off on Coating Method for Large-area Perovskite Battery Thin Films

Coating Method for Large-area Perovskite Battery Thin Films As a coating method for large-area perovskite cell films, ultrasonic spraying machine is a good choice. Ultrasonic spraying is a coating method for preparing large-area perovskite cell films, which has the characteristics of high stability and wide application. The advantage of this method is that it can promote hole transport and adjust the quality of the perovskite film, while being [...]

21 10, 2023

Ultrasonic Spraying of Fuel Cell Membrane Electrodes

By |2023-10-27T06:23:10+00:00October 21st, 2023|Energy, NEWS|Comments Off on Ultrasonic Spraying of Fuel Cell Membrane Electrodes

Ultrasonic Spraying of Fuel Cell Membrane Electrodes Ultrasonic spraying technology is used to prepare fuel cell membrane electrodes with high efficiency and good coating quality. Do you know how it is done? The membrane electrode of the fuel cell is a key core component of the fuel cell power generation. The membrane electrode and the bipolar plates on both sides form the basic unit of the fuel cell [...]

19 10, 2023

Preparation of Perovskite Battery Thin Films by Ultrasonic Spraying

By |2023-10-27T07:40:18+00:00October 19th, 2023|Energy, NEWS|Comments Off on Preparation of Perovskite Battery Thin Films by Ultrasonic Spraying

Preparation of Perovskite Battery Thin Films by Ultrasonic Spraying Ultrasonic spraying is a new method for preparing large-area perovskite battery films. The ultrasonic spraying method has the advantage of high stability. It is made of high-performance titanium alloy and stainless steel. It has strong adaptability, corrosion resistance, no pressure, no noise, no nozzle wear and clogging, and high uniformity of atomized particles. Perovskite batteries are currently the most [...]

Go to Top