Catalyst Coated Membrane Technique Useing of an ultrasonic spray for the fabrication ultra-low Pt loading MEAs with the catalyst coated membrane technique. Cathode Pt loading coated with catalyst ink by the ultrasonic spray method was investigated. It was determined that 0.272 mgPt/cm2 showed the best performance for 33 wt% Nafion content in a catalyst coated membrane when it was ultrasonically spray coated with SGL 24BC gas diffusion layer. [...]

Ultrasonic Spray For MEA Fabrication Ultrasonic spray coating technique is replacing air spray coating technique in a wide range of industrial and R&D applications, such as photo resistor coating, solar cell industry and fuel cell industry. Ultrasonic spray coating is a technology that is more precise, more controllable, and tighter of drop distribution. Tight drop distribution and non-clogging ultrasonic create very uniform thin films, therefore, ultrasonic spray coating [...]

The basic difference between PEMFC and SOFC PEMFC hydrogen is the fuel, which requires high purity. The electrolyte is a high-molecular polymer, usually a proton conductor. Catalyst platinum carbon, gas diffusion layer carbon. Bipolar plates have carbon and metal. The working temperature is low. The electrode reaction zone involves a three-phase reaction, which is more complicated. Consider water management issues. SOFC can use hydrocarbons as fuel. The electrolyte [...]

Thin Film Coating Equipment Thin Film Coating Equipment - Ultrasonic Spray Nozzle - Cheersonic The company adopts a brand-new ultrasonic thin-film solar cell coating equipment, which is mainly used for experimental research and application of solar cell perovskite, OLED and PLED, and semiconductor preparation. The ultrasonic thin-film solar cell coating equipment is small in scale, low in site requirements, short to complete the multi-layer coating process, low production [...]

Spray Film Solar Cell Spray Film Solar Cell - Ultrasonic Spray - Cheersonic (1) Application: thin film solar cells (2) Liquid: perovskite solution (viscosity dilute) (3) Substrate: glass (4) Film thickness: 100 μ M (5) Experimental equipment

Application of ultrasonic spraying in fuel cell Application of ultrasonic spraying in fuel cell - Ultrasonic Coating - Cheersonic 1 application: fuel cell 2 liquid: catalyst 3 substrate: proton exchange membrane 400mm * 400mm 4. Film thickness: 15-20 μ M 5 experimental equipment

Perovskite Spray Perovskite Spray - Ultrasonic Coating - Cheersonic 1 application: thin film solar cells 2 spraying liquid: perovskite solution (the viscosity is slightly thicker than water and can be diluted) 3 substrate: glass. 4. Spraying area: indefinite 5 film thickness: 1.5 μ m and 31 μ m have been made 6 equipment type: experimental type

Types of carbon electrodes The electrode materials we use usually have many physical and chemical properties. For example, good conductivity, low resistivity to improve the power of the molten pool; then high melting point; there is a small coefficient of thermal expansion, when the temperature changes suddenly, it is not easy to deform, and it can not produce small cracks due to the internal stress caused by temperature [...]

Battery Technology Is Hard To Break Through Battery Technology Is Hard To Break Through - Ultrasonic Spray - Cheersonic With the rapid development of science and technology, mobile intelligent devices such as various mobile phones, tablets, ultrabasic devices are visible development, which is basically going to a higher level every year. But they can not get rid of the limitation of too small capacity of lithium battery. Basically, [...]

How to assemble high performance fuel cell stack? Assemble High Performance Fuel Cell Stack - Ultrasonic Spray - Cheersonic Any product can't be transformed from an idea into a real object without manufacturing, and there will be errors in the manufacturing of any product. It's impossible to produce a ruler that is absolutely equal to one meter, only a ruler that is almost one meter. The same is [...]