Economy Ultrasonic Spray Coating Machine Our company is not only standard ultrasonic coaters but also economy ultrasonic spray coating machine, such as UAM1000, a. Bench-top platform for R&D process or low-volume production b. Be installed with one set of ultrasonic spray system including 50kHz ultrasonic generator and nozzle c. 300*300mm heating plate for spray, the max temperature is up to 150℃ d. Controllable film thickness various from tens [...]

Maskless Lithography Maskless Lithography - Semiconductor Coating - Cheersonic Masks are complicated to make, have a long cycle and are expensive. Once completed, they cannot be modified. While masks help the rapid evolution of the industry, these defects also severely limit the development of the industry. In order to achieve a more flexible lithography process, the industry has begun to study replacing physical masks with other things, or [...]

Mask Lithography Mask Lithography - Semiconductor Coating - Cheersonic At present, affected by the continuous spread of the global shortage of cores, the chip problem has attracted widespread attention. As the core equipment of the chip manufacturing industry, the lithography machine can be described as the focus of the industry. In chip manufacturing, lithography is a crucial link. Photolithography refers to the technology of transferring the pattern on [...]

Benchtop Coating System Benchtop Coating System - Spraying Photoresist - Ultrasonic Spraying - Cheersonic We have much experience in spraying photoresist and in our factory, there is ultra clean room. The programmable bench top design ultrasonic spray coating machine UAM4000L is ideal for producing various thin film coatings in R&D process. Solutions, suspensions and nanosuspensions can be depositing into different substrate for uniform and durable coatings during spray. [...]

Ultrasonic Spraying Machine For Photoresist Ultrasonic Spraying Machine For Photoresist - Coating Nozzles - Cheersonic UAM6000 ultrasonic spraying machine is suitable for mass production and continuous spraying, and the maximum substrate size for spraying is 500*500mm. Ultrasonic coating of Cheersonic is a unique, environmentally-friendly, low velocity spray technology that creates micro thickness, very uniform protective and functional thin film with no clogging and very little overspray. Applicable case, [...]

Precision cleaning process of PCBA Precision cleaning process of PCBA - Semiconductor Coating - Cheersonic The COVID-19 pandemic has raised the importance of wearable medical devices and remote monitoring and diagnostic equipment to unprecedented heights. But these devices, as well as complex PCBAs (printed circuit board assemblies), must provide reliable and consistent performance, especially when they are used in life-sustaining equipment. Cleaning is a key factor in maintaining [...]

Ultrasonic Photoresist Coater Ultrasonic Photoresist Coater - Spraying Photoresist For MEMS Wafers The ultrasonic spray coating machine UAM6000 combines new spray and control technology to achieve more uniform, denser and controllable thin film coating. The equipment integrates multiple systems, such as ultrasonic, carrier gas, heating plate, vacuum adsorption and exhaust gas discharge. At the same time, it can be applied to a full range of ultrasonic nozzles, suitable [...]

Photoresist Spraying UAM6000 ultrasonic photoresist spraying equipment can spray photoresist thickness from 2um to 35um on substrates with diameters from 65mm to 200m. According to our experience with photoresist spraying, its solvent is generally Acetone, MEK, PGMEA or butyl acetate. Firstly the substrate must be level, non-levelness will cause unevenness in the film. Then for the uniform and controllable coating thickness, it requires higher coating process. Our company [...]

Spray Coating Photoresists Spray Coating Photoresists - Ultrasonic Spray Nozzle - Cheersonic Cheersonic focused on the ultrasonic coating technology more than 20 years. We have much experience in spraying photoresist fields. UAM4000L ultrasonic spraying machine is a popular equipment in experimental research and development and small batch production, which can be used in the following cases: Liquid: photoresists Thickness of film: 2um to 35 um Size of substrate: [...]