cheersonic, Author at Ultrasonic Coating Solutions

7 04, 2021

Recent Developments in Drug-Coated Balloons – Part 3

Recent FDA Approvals for Drug-eluting Balloons In November 2019, the FDA cleared the Medtronic In.Pact AV DCB for the treatment of failing AV access in patients with end-stage renal disease (ESRD) undergoing dialysis. Over time, vessel restenosis limits the ability to use AV fistulae effectively. In order to restore function, patients often undergo one to three maintenance procedures per year, which can result in significant disruptions to critical hemodialysis care [...]

7 04, 2021

Recent Developments in Drug-Coated Balloons – Part 2

Use of Drug-coated Balloons in Coronary Arteries to Treat In-stent Restenosis Coronary artery in-stent restenosis (ISR) is observed in about 10 percent of patients who undergo a drug eluting stent (DES) implantation and in more than 30 percent of patients who undergo bare-metal stent (BMS) implantation. Three DEBs for the coronaries have now been granted FDA breakthrough device designation to help expedite the approval process. In July 2020, MedAlliance began enrollment [...]

7 04, 2021

Recent Developments in Drug-Coated Balloons – Part 1

Recent Developments in Drug-Coated Balloons - Part 1 Several drug-eluting balloons are now designated as breakthrough devices by the FDA The Philips Healthcare Stellarex drug-coated balloon (DCB). It is cleared for use in peripheral vessels and treatment of failing AV access. Drug-coated balloons (DCB), also referred to as drug-eluting balloons (DEB), were created as a way to reduce very high restenosis rates in peripheral vessels. They also have [...]

7 04, 2021

Overview of Angioplasty Balloon Technology Advances

Overview of Angioplasty Balloon Technology Advances Getty Images The first devices developed for interventional cardiology were percutaneous transluminal coronary angioplasty (PTCA) balloon catheters to reopen coronary arteries. Forty years later, they remain a primary workhorse device in percutaneous coronary interventions (PCI). While stents have taken the limelight in terms of the primary focus in PCI, balloons are still the method used to initially revascularize the vessel [...]

6 04, 2021

Types of carbon electrodes

Types of carbon electrodes The electrode materials we use usually have many physical and chemical properties. For example, good conductivity, low resistivity to improve the power of the molten pool; then high melting point; there is a small coefficient of thermal expansion, when the temperature changes suddenly, it is not easy to deform, and it can not produce small cracks due to the internal stress caused by temperature [...]

6 04, 2021

Battery Technology Is Hard To Break Through

Battery Technology Is Hard To Break Through Battery Technology Is Hard To Break Through - Ultrasonic Spray - Cheersonic With the rapid development of science and technology, mobile intelligent devices such as various mobile phones, tablets, ultrabasic devices are visible development, which is basically going to a higher level every year. But they can not get rid of the limitation of too small capacity of lithium battery. Basically, [...]

6 04, 2021

How to assemble high performance fuel cell stack

How to assemble high performance fuel cell stack? Assemble High Performance Fuel Cell Stack - Ultrasonic Spray - Cheersonic Any product can't be transformed from an idea into a real object without manufacturing, and there will be errors in the manufacturing of any product. It's impossible to produce a ruler that is absolutely equal to one meter, only a ruler that is almost one meter. The same is [...]

6 04, 2021

Design Features Of Fuel Cell Bipolar Plate

Design Features Of Fuel Cell Bipolar Plate Design Features Of Fuel Cell Bipolar Plate - Ultrasonic Spray - Cheersonic Bipolar plate is the main structural support of fuel cell stack, and its structural design forms the flow channel of hydrogen, air and water in the stack. As the main structure of the stack, the thickness of bipolar plate directly affects the power density of the stack. At present, [...]

4 04, 2021

Automatic Ultrasonic Coating Systems

Automatic Ultrasonic Coating Systems Automatic Ultrasonic Coating Systems For Vacuum And Semiconductor Equipment Balloon Catheter Coating Ultrasonic spraying for drug plug coating UAM6000 Ultrasonic Circuit Board Spray Test If you are interested in ultrasonic spraying system, if you want to know the price of ultrasonic spraying system, please contact us, market2@cheersonic.com

3 04, 2021

Spraying Solid Oxide Fuel Cells

Spraying Solid Oxide Fuel Cells Spraying Solid Oxide Fuel Cells - Ultra Sonic Spray Coating - Cheersonic My client is looking for a ultrasonic nozzle for experimental studies about diesel reforming to supply Solid Oxide Fuel Cells. We suggest UAM4000L ultrasonic coating machine. The machine can be used for laboratory research of a variety of fuel cell research. In the past ten years, we have many customers in [...]

About cheersonic