Drug Coating to a Balloon Catheter Drug Coating to a Balloon Catheter - Spray Coating Equipment - Cheersonic There is ultrasonic spray system UAM7000 for depositing uniform thin films of anti-restenosis drugs onto implantable devices such a cardiac and peripheral stent. Balloons are inflated prior to coating. A rotational motor rotates the catheter and balloon 360 degrees while a precision clamping device securely holds the catheter tail in [...]
Gas Diffusion Layer Coating Gas Diffusion Layer Coating - Spraying Catalyst Solutions - Cheersonic Proton exchange membrane fuel cells (PEMFCs) are comprised of a proton-conductive membrane which has cathode catalyst layer on one side and anode catalyst layer on the other side, sandwiched between two gas diffusion layers. Gas diffusion layers serve as current collectors that allow ready access of the fuel and oxidant to anode and cathode [...]
Lithium Battery Separator Industry Chain Lithium Battery Separator Industry Chain - Coated Lithium Battery Separator - Cheersonic The upstream of the lithium battery separator industry chain is the basic raw material polyethylene (PE) or polypropylene (PP), PE and PP. These are all commodities and account for 40% of the cost of the diaphragm. From the perspective of diaphragm production process, raw material formulation technology, extrusion process, film stretching [...]
Working of Fuel Cell Working of Fuel Cell - PEM Fuel Cell Production - Cheersonic Fuel cells require a continuous input of fuel and an oxidizing agent (generally oxygen) in order to sustain the reactions that generate the electricity. Therefore, these cells can constantly generate electricity until the supply of fuel and oxygen is cut off. Today, these devices are used as the primary or secondary source of [...]
Photoresist Coating Process Photoresist Coating Process - Photoresist Deposition - Cheersonic The photoresist needs to form a uniform film on the surface of the wafer, and the photoresist is coated on the wafer by the coating equipment under high-speed rotation. The thickness of the photoresist can be adjusted according to the rotational speed and the viscosity of the photoresist. The higher the rotational speed, the thinner the film, [...]
Ultrasonic Spray Coating for PEM Fuel Cell Ultrasonic Spray Coating for PEM Fuel Cell - PEM Spray - Cheersonic Ultrasound is now a widely used method for catalyst synthesis, catalyst support treatment, catalyst layer fabrication, membrane electrode assembly (MEA) fabrication, and humidifier etc. for fuel cell applications. Among the above mentioned uses, ultrasonic technology has been utilised mainly for MEA fabrication—especially since it has demonstrated the capability to [...]
Deposit Catalyst on Gas Diffusion Electrode The carbon paper has excellent features such as high conductivity, high gas permeability, corrosion resistance, and high strength, make this a favorite base material for fuel cell electrodes and other electrode applications. UAM1000 Ultrasonic spraying can deposit catalyst on gas diffusion electrode. This small benchtop ultrasonic coater UAM1000 is suitable for early laboratory R&D to research the specific spray process so that [...]
Ultrasonic Spraying For The Fabrication Of SOFC Ultrasonic Spraying For The Fabrication Of SOFC - Cheersonic Fuel Cells are electrochemical devices that are able to directly convert chemical energy to electrical energy, without any Carnot limitation. Hence, their energy efficiencies are relatively high. Among the various types of fuel cells, solid oxide fuel cells (SOFC) are operated at high temperatures and in principle can run on various fuels [...]
Medical Tubing Application Examples Medical Tubing Application Examples - Medical Coatings - Cheersonic Hoses and tubing are used in a wide variety of applications in the medical industry, from wound drains and catheters to drug delivery and feeding tubes. The current production technology for such products has gone far beyond single-lumen hollow tubes to multi-lumen extruded tubes that can include stops, bumps and different thicknesses in a single [...]
Ultrasonic Spraying of Fuel Cell Coatings Ultrasonic Spraying of Fuel Cell Coatings - Spraying System - Cheersonic Ultrasonics has been used in a host of fuel cell related technologies such as Proton Exchange Membranes (PEM) fuel cells, Gas Diffusion Layers (GDLs), Solid Oxide Fuel Cells, electrodes and electrolyte membranes. Ultrasonic spray technology is ideally suited for spray coating costly materials such as platinum and other precision metals in [...]
Address: No. 11-13, Chuangye Road, Changkou Town, Fuyang District, Hangzhou City, Zhejiang Province | Phone: +86-571-87910406
© Copyright 1998 - 2026 | CHEERSONIC UlLTRASONICS EQUIPMENTS CO.,LIMITED | Contact Us | Powered by Cheersonic
