Large Area Membrane Electrode Catalyst Coating Today I would like to introduce to you a high-end coating system, UAM6000XL! It can be used to produce large-scale membrane electrode coatings. The UAM6000XL coating system has the ability to coat catalysts on GDL or fuel cell membranes, with a coating area of up to 1.2 meters * 1.2 meters or more, which provides great convenience and convenience for the production [...]
Coating Method for Large-area Perovskite Battery Thin Films As a coating method for large-area perovskite cell films, ultrasonic spraying machine is a good choice. Ultrasonic spraying is a coating method for preparing large-area perovskite cell films, which has the characteristics of high stability and wide application. The advantage of this method is that it can promote hole transport and adjust the quality of the perovskite film, while being [...]
Ultrasonic Spray Stent Drug Coating Ultrasonic spraying of stent drug coatings is revolutionizing the treatment of cardiac stents. Ultrasonic spraying to prepare cardiac stent coating is a new drug coating technology. It uses the atomization principle of ultrasonic nozzle to break down the drug solution into tiny particles through high-frequency vibration. These tiny particles will freely float on the medical stent along with the gas. . The drug [...]
Ultrasonic Spraying of Fuel Cell Membrane Electrodes Ultrasonic spraying technology is used to prepare fuel cell membrane electrodes with high efficiency and good coating quality. Do you know how it is done? The membrane electrode of the fuel cell is a key core component of the fuel cell power generation. The membrane electrode and the bipolar plates on both sides form the basic unit of the fuel cell [...]
Insulating Coating Ultrasonic Spraying The application of ultrasonic spraying in insulating coatings is widely used because of its advantages such as finely controllable spray flow rate and thin and uniform coating. The ultrasonic spraying process can improve the uniformity and adhesion of the coating in insulating coatings. Because the paint droplets formed by ultrasonic spraying are more uniform, the surface flatness and adhesion of the coating can be [...]
Preparation of Perovskite Battery Thin Films by Ultrasonic Spraying Ultrasonic spraying is a new method for preparing large-area perovskite battery films. The ultrasonic spraying method has the advantage of high stability. It is made of high-performance titanium alloy and stainless steel. It has strong adaptability, corrosion resistance, no pressure, no noise, no nozzle wear and clogging, and high uniformity of atomized particles. Perovskite batteries are currently the most [...]
Preparation of Fuel Cell Membrane Electrodes by Ultrasonic Spray Ultrasonic spraying is used to prepare fuel cell membrane electrodes. This technology must be unfamiliar to everyone. Today I will introduce it to you. The preparation of fuel cell membrane electrodes by ultrasonic spraying is a new fuel cell technology developed in recent years. The principle of this technology is to apply ultrasonic coating technology on the membrane electrode [...]
Ultrasonic Spray Carotid Artery Stent A carotid stent is a medical device used to treat carotid artery stenosis. It works by spraying drugs onto the carotid artery stent wall using ultrasound to treat carotid artery stenosis. This technology makes carotid artery stent surgery simpler and safer! Ultrasonic spraying to prepare carotid artery stent coating is a very useful technology. It uses the atomization principle of ultrasonic nozzle to [...]
Spraying Water-based Organic Catalysis Spraying Water-based Organic Catalysis With Ultrasonic Spray System - Cheersonic UAM6000S Ultrasonic coating system can solve the following tasks: Installation for spraying an aqueous-organic suspension of a catalyst onto a flat horizontal surface (on a membrane or on a gas pump). Ultrasound can ensure that the suspension is as uniform as possible. The application area is at least 25 cm2, but up to 50 [...]
Ultrasonic Welding of Low Solderability Metals Ultrasonic Welding of Low Solderability Metals - Soldering Iron - Cheersonic The difficulty of obtaining high-quality welding joints for different materials under certain welding conditions and using certain welding methods is called the weldability of the material. For the same metal material, there may be significant differences in its weldability when different welding methods and materials are used. The weldability of metals [...]
Address: No. 11-13, Chuangye Road, Changkou Town, Fuyang District, Hangzhou City, Zhejiang Province | Phone: +86-571-87910406
© Copyright 1998 - 2026 | CHEERSONIC UlLTRASONICS EQUIPMENTS CO.,LIMITED | Contact Us | Powered by Cheersonic
