Ultrasonic Spraying of Fuel Cell Membrane Electrodes Ultrasonic spraying technology is used to prepare fuel cell membrane electrodes with high efficiency and good coating quality. Do you know how it is done? The membrane electrode of the fuel cell is a key core component of the fuel cell power generation. The membrane electrode and the bipolar plates on both sides form the basic unit of the fuel cell [...]
Insulating Coating Ultrasonic Spraying The application of ultrasonic spraying in insulating coatings is widely used because of its advantages such as finely controllable spray flow rate and thin and uniform coating. The ultrasonic spraying process can improve the uniformity and adhesion of the coating in insulating coatings. Because the paint droplets formed by ultrasonic spraying are more uniform, the surface flatness and adhesion of the coating can be [...]
Preparation of Perovskite Battery Thin Films by Ultrasonic Spraying Ultrasonic spraying is a new method for preparing large-area perovskite battery films. The ultrasonic spraying method has the advantage of high stability. It is made of high-performance titanium alloy and stainless steel. It has strong adaptability, corrosion resistance, no pressure, no noise, no nozzle wear and clogging, and high uniformity of atomized particles. Perovskite batteries are currently the most [...]
Preparation of Fuel Cell Membrane Electrodes by Ultrasonic Spray Ultrasonic spraying is used to prepare fuel cell membrane electrodes. This technology must be unfamiliar to everyone. Today I will introduce it to you. The preparation of fuel cell membrane electrodes by ultrasonic spraying is a new fuel cell technology developed in recent years. The principle of this technology is to apply ultrasonic coating technology on the membrane electrode [...]
Ultrasonic Spray Carotid Artery Stent A carotid stent is a medical device used to treat carotid artery stenosis. It works by spraying drugs onto the carotid artery stent wall using ultrasound to treat carotid artery stenosis. This technology makes carotid artery stent surgery simpler and safer! Ultrasonic spraying to prepare carotid artery stent coating is a very useful technology. It uses the atomization principle of ultrasonic nozzle to [...]
Spraying Water-based Organic Catalysis Spraying Water-based Organic Catalysis With Ultrasonic Spray System - Cheersonic UAM6000S Ultrasonic coating system can solve the following tasks: Installation for spraying an aqueous-organic suspension of a catalyst onto a flat horizontal surface (on a membrane or on a gas pump). Ultrasound can ensure that the suspension is as uniform as possible. The application area is at least 25 cm2, but up to 50 [...]
Ultrasonic Welding of Low Solderability Metals Ultrasonic Welding of Low Solderability Metals - Soldering Iron - Cheersonic The difficulty of obtaining high-quality welding joints for different materials under certain welding conditions and using certain welding methods is called the weldability of the material. For the same metal material, there may be significant differences in its weldability when different welding methods and materials are used. The weldability of metals [...]
Rubber Bottle Stopper Inert Soft Coating Pharmaceutical butyl rubber bottle stoppers, even the cleanest and most inert, can be compatible with drugs, especially some cephalosporins, large infusion drugs, and some carbonate infusion products. The best way to solve these problems is to choose an inert soft coating that is applied to the surface of the rubber stopper to isolate direct contact between the drug and the rubber bottle [...]
Coating Flexible Surfaces With Nanoparticle Solutions The ultrasonic spray coating machine can be used for coating flexible surfaces with nanoparticle solutions. The particle size can be up to 150 nm and coating size can be up to 300 nm and even more. the sample size can be 10-15 cm. About Cheersonic Cheersonic is the leading developer and manufacturer of ultrasonic coating systems for applying precise, thin film coatings to protect, strengthen [...]
Large Area Ultrasonic Coating Machine UAM6000XL (drawer type) Large Area Ultrasonic Coating Machine is a production scale coating system with the ability to coat fuel cell membranes or glass substrates, with a coating area of up to 1280 * 710mm. Contact Us UAM6000XL (drawer type) Large Area Ultrasonic Coating Machine We often offer custom solutions that meet the needs of up [...]
Address: No. 11-13, Chuangye Road, Changkou Town, Fuyang District, Hangzhou City, Zhejiang Province | Phone: +86-571-87910406
© Copyright 1998 - 2024 | CHEERSONIC UlLTRASONICS EQUIPMENTS CO.,LIMITED | Contact Us | Powered by Cheersonic
